Microcomputer type plastic pendulum impact testing machine
Device model: ZBC1400C
Equipment description: The microcomputer-type plastic pendulum impact testing machine is a testing instrument for the performance test of non-metallic materials such as plastics, nylon, hard rubber, glass steel, electrical insulation materials and other non-metallic materials under dynamic load. This machine adopts semi-automatic control, easy operation and high working efficiency. The test data is automatically obtained after impacting the sample. The superiority can be more reflected in the continuous impact test laboratory and a large number of manufacturers doing impact test. The special control panel and display screen equipped with this machine can meet the operation and display requirements of the user's test, such as displaying the impact absorption work, impact strength, pendulum movement angle, and printing test reports. The machine can be used for simple beam test and cantilever beam test. The support is easy to adjust and replace, and it has strong applicability. It is an indispensable testing instrument for rigid plastic manufacturers, quality inspection units, and scientific research institutes.
Executive standard:
GB / T 1043-2008 "Impact test method of hard plastic simply supported beam"
GB / T 1843-1996 "Plastic Izod Impact Test Method"
JB / T 8761-1998 "Plastic Cantilever Impact Tester"
JB / T 8762-1998 "Plastic simply supported beam impact test machine"
ISO 179: 2000 "Plastics-Determination of Charpy impact properties"
ISO 180: 2000 "Plastics-Determination of Izod impact strength"
The main technical parameters:
1. Maximum impact energy: simply supported beam 4J, 2J
Cantilever beam 4J, 2.75J
2. Pendulum torque: simply supported beam 2.1436N • m, 1.0718 N • m
Cantilever beam 2.1436N • m, 1.4737 N • m
3. Pre-lifting angle of pendulum: 150º
4. Angle resolution: 0.1º
5. Technical parameters of simply supported beams:
1) Impact speed: 2.9m / s
2) The distance from the center of the swing axis to the center of the sample: 230㎜
3) Blade angle: 30 °
4) Blade radius radius: 2㎜
5) Supporting corner radius: 1㎜
6) Front angle of support: 5 °
7) Rear angle of support: 10 °
8) Support span: 40㎜, 60㎜, 70㎜
9) Sample type and size (length × width × thickness):
80㎜ × 10㎜ × 4㎜
50㎜ × 6㎜ × 4㎜
120㎜ × 15㎜ × 10㎜
6. Technical parameters of cantilever beam:
1) Impact speed: 3.5m / s
2) The distance from the center of the swing axis to the center of the sample: 335㎜
3) Blade angle: 75 °
4) Blade radius radius: 0.8㎜
5) Blade rake angle: 5 °
6) Blade back angle: 10 °
7) Blade center distance from jaw upper surface: 22 ± 0.2㎜
8) Sample type and size (length × width × thickness):
80㎜ × 10㎜ × 4㎜
63.5㎜ × 12.7㎜ × 12.7㎜
63.5㎜ × 12.7㎜ × 6.4㎜
63.5㎜ × 12.7㎜ × 3.2㎜
7. Overall dimensions of the host (length × width × height): about 360 ㎜ × 240 ㎜ × 720
8. Host weight: about 70㎏
9. Host power supply: AC single-phase 220V ± 10% 50Hz 0.5kW
Optional equipment configuration:
1. Simple supported beam pendulum: 2J
2. Cantilever beam pendulum: 2.75J
