Equipment Name:Steel bar bending testing machine

Equipment model：XBW40

Equipment Overview:

      The steel bar bending test machine is a specialized equipment for conducting cold bending tests and plane and reverse bending tests on steel bars. Its main technical parameters comply with GB1499.2-2018 "Steel pipes for reinforced concrete - Part 2: Hot rolled ribbed steel bars" and YB/T5126-2018 "Test scheme for transverse bending of steel bars", as well as the provisions and requirements for cold bending test and transverse bending test in ISO10065:1900. This equipment is an ideal testing device for steel mills and construction units to inspect the bending and anti bending performance of steel bars.

      The steel bar bending testing machine has the characteristics of compact structure, simple operation, intuitive display of bending angle, easy maintenance, smooth operation, safety, and low noise.

1、 Installation:

      Installed on a stable basis, the horizontal deviation should not exceed 0.5/1000; Connect to a three-phase four wire system, 50Hz, 380V power supply.

3、 Technical parameters:

Diameter range of bent steel bars        φ6-φ40mm

Positive bending angle             0-180°Internal arbitrary setting

Reverse bending angle             0-180°Internal arbitrary setting

Working disk speed               1.4r/min

Electric motor power               1.5kW

Machine appearance                 1200×750×1000（mm）

Machine weight                 700kg

Forward bending core: 4×Ф6、4×Ф8、4×Ф10、4×Ф12、4×Ф14、4×Ф16、4×Ф18、4×Ф20、4×Ф22、4×Ф25、4×Ф28、4×Ф32、4×Ф36、4×Ф40

Reverse bending core: 5×Ф6、5×Ф8、5×Ф10、5×Ф12、5×Ф14、5×Ф16、5×Ф18、5×Ф20、5×Ф22、5×Ф25、5×Ф28、5×Ф32、5×Ф36、5×Ф40